Peer Wiik
[ Home ] [ Up ]

 

I am sending the some pictures from my work last winter

  • New Dash board and steering wheel ring made from solid walnut pic00001.jpg (78553 bytes)
  • The front frame was broken, and I had to cut the frame and weld it. The picture shows the quality of the old repair.pic00005.jpg (66219 bytes)
  • Home made thread repair for the cylinder block pic00029.jpg (69229 bytes) 
  • New threads for the outlet to the oil cooler made with the same principle as before.pic00030.jpg (72250 bytes)
  • Detail from the repair of the front frame pic00056.jpg (64208 bytes)

Give me your feedback!

Best regards Per Wiik

 

Recipients of information provided on this site should check with relevant experts before relying on it.

Note that content on this part of the site (jowettnet) may be superseded by that in Jowett.org, JowettTalk or JowettGallery

All content  is copyright of Keith Clements.

Contact  webmaster via requests  for permission to use.  Please leave 'JCC-' in the subject.

[ Home ] [ Up ] [ Eric Aldcroft ] [ MikeAlfrey ] [ AngusBell ] [ PerBengtsson ] [ Drummond Black ] [ PaulBrierley ] [ HowardBryan ] [ GeorgeDawson ] [ BasGerda_deBruyn ] [ PeterDixon ] [ RobinFairservice ] [ TonyFearn ] [ ChrisFreudenberg ] [ TonyGeorge ] [ Barry Harding ] [ BrianHehir ] [ Erik Hihnala ] [ FredHollaway ] [ Jack Jacobs ] [ GustavJosefsson ] [ Rick Jowett ] [ John Kenna ] [ PatLockyer ] [ PatrickDiMarco ] [ James Miller ] [ NeilMoore ] [ Keith Murphy ] [ HansMatter ] [ IbRasmussen ] [ ScottRenner ] [ DennisSparrow ] [ Giles Tozer ] [ Peer Wiik ]